# Can I use a 380V motor on 460V?

## Can I use a 380V motor on 460V?

A three phase 460V motor operating at 60 Hertz has the same V/Hz ratio as a 380V motor operating at 50 Hertz – approximately 7.6V/Hz. As long as the load torque does not change between the two speeds (60Hz/50Hz), the motor will draw the same current at both speeds, and no harm will come to the motor.

What does 380V 50Hz mean?

It means that the meter is capable of measuring 3-phase 220V/100A and/or 3-phase 380V/30A power from a 50Hz source.

### What’s better 50Hz or 60Hz?

The primary difference between 50 Hz (Hertz) and 60 Hz (Hertz) is simply that 60 Hz is 20% higher in frequency. Lower the frequency, speed of induction motor and generator will be lower. For example with 50 Hz, generator will be running at 3,000 RPM against 3,600 RPM with 60 Hz.

Can you connect 230V 50Hz to 220V 60Hz?

No. In fact you can not even connect two 230 V 50Hz together unless they are in phase synchronisation. Try connecting two phases of a three phase supply together to power a common load and see what happens.

#### Can you run 50Hz on 60Hz?

Electrical machines designed for 50Hz can usually work safely in 60Hz power supply, but not applicable to 60Hz machines to be run in 50Hz power supply. It is not always easy to just change the machine or equipment to rated frequency considering the FINANCIAL BURDEN that comes with it.

What is the difference between 220v 50Hz and 220v 60Hz?

The more significant difference is that 60Hz systems usually use 110V (120V) or thereabouts for the domestic power supply, while 50Hz systems tend to use 220V, 230V etc. for different countries. However the optimum system is accepted as around 230V (wire size and power required versus safety).

## Can a 60Hz appliance run on 50Hz?

Generally 60 hz appliance are designed for 110v and 50 hz appliance are for 220-240. In this case if you use 60 hz appliance in 50 hz, it’ll burn(if there is no over voltage protection circuit).

Can 60Hz microwave work on 50Hz?

If it has been designed specifically for 60Hz operation, at 50Hz it will not be as efficient & will run hotter – and thus be susceptible to premature failure. Again, depending on design, it may not deliver sufficient power to meet the appliance’s needs. That said, manufacturing today is increasingly ‘globalised’.

### Can I use a 220v 60Hz appliance in a 220v 50Hz power supply?

Can I use a 220v 50Hz appliance in a 220v 60Hz power supply? – Quora. In many cases an appliance made for 220 volts 50 hertz will work fine at the same voltage but 60 hertz. Some motors may be a bit weaker in the 60 Hz grid, but usually the design has big enough margin of safety that this should not matter.

Which is more dangerous 50Hz or 60Hz?

Several answers correctly explain that there is no difference between 50 and 60 Hertz AC electrical currents in their likelihood to cause heart fibrillation. Several answers correctly explain that there is no difference between 50 and 60 Hertz AC electrical currents in their likelihood to cause heart fibrillation.

#### Is 50/60Hz good for gaming?

Running games at 144 fps on a 144hz monitor is great, but it isn’t always feasible. Additionally, 60hz will put you on par with modern console gamers. Running games at 60 fps on a 60hz monitor is by no means a bad experience. The only people who have issues gaming at 60hz are the ones who are used to gaming at 144hz.

What does 220v 50Hz mean?

The voltage and frequency of alternating current (AC) electricity used in homes varies from country to country throughout the world. Typically, either 110-volt AC (110V) or 220-volt AC (220V) is used. Most countries use 50Hz (50 Hertz or 50 cycles per second) as their AC frequency.